When you start planning a kitchen or a wardrobe, you hear a lot of names at once: MDF, HPL, melamine, solid wood. And every supplier presents its own material as the best. This guide explains the difference simply, so you know what you are paying for and what to ask before you sign.
First: the body and the surface are two different things
The key idea here is that a kitchen unit or wardrobe is usually made of two parts:
- The core board (the body): the wood that gives the piece its strength, such as MDF, particleboard or plywood.
- The surface layer: what you see and touch, such as melamine, HPL, natural veneer or paint.
So when someone says "it's an HPL kitchen", they are describing the surface. Your next question should be: and what board is underneath?
Solid wood
Wood cut directly from the tree trunk, such as oak, walnut and beech.
- Strengths: clear luxury, a long life, and it can be sanded and refreshed after years.
- Weak points: it expands and contracts as heat and humidity change, costs more, and needs good treatment.
- Where it's used: premium interior doors, tables and classic furniture fronts.
MDF
Wood fibres pressed with a binder under high heat and pressure.
- Strengths: a smooth, even surface, ideal for painting, routing and modern designs.
- Weak points: standard MDF is affected by water if its edges aren't fully sealed.
- What to ask: is the board moisture-resistant? This type is often recognisable by its greenish colour and is preferred for sink units.
Particleboard
Pressed wood chips and particles, the most widely used material for cabinet bodies worldwide.
- Strengths: relatively light, stable without warping, and economical.
- Weak points: affected by moisture if water reaches its edges, and doesn't tolerate screws being removed and refitted repeatedly.
- What to ask: density, moisture-resistance grade and the quality of edge banding.
Plywood
Thin layers of real wood glued with the grain crossing.
- Strengths: very strong, and handles moisture and weight better than many boards.
- Weak points: costs more, and its surface needs a good finish.
Surface layers: melamine, HPL, veneer and paint
- Melamine: resin-soaked paper pressed straight onto the board. Economical, resists everyday scratches, and suits cabinet interiors.
- HPL (high-pressure laminate): layers pressed under very high pressure, harder and more resistant to scratches and heat than melamine, suited to fronts that see heavy use.
- Natural veneer: a thin slice of real wood that gives a solid-wood look at a lower cost and with more stability.
- Paint (lacquer): an even colour and a premium feel; quality depends on the number of coats and how they are sprayed and cured.
What suits the Eastern Province's climate?
High humidity in the Eastern Province makes these questions more important than the material's name:
- Are the boards in the sink and dishwasher units moisture-resistant?
- Are all edges fully banded and sealed, including the back edges and drilled holes?
- What is the boards' emission grade? Ask about ratings such as E1 or E0; lower emissions are better for the air in your home.
- Can the surface layer take the heat near the oven and hob?
- Does the warranty cover both the body and the surfaces, and for how many years?
A kitchen's durability doesn't depend on wood alone; hinges and drawer runners matter just as much, as we explain in our guide to kitchen and wardrobe hinges.
With ZBOM: touch the material and ask about it before you decide
At the ZBOM showroom in Khobar you can see the materials and finishes with your own eyes and ask the designer about the board and surface of every piece. Every kitchen or wardrobe order comes with free interior design, free measuring, free delivery and installation in the Eastern Province, and a warranty of up to 15 years on kitchens and wardrobes. See the Auraro kitchen and the Cloud wardrobe.
Frequently asked questions
Which is better for a kitchen, solid wood or MDF?
There is no single answer. Solid wood is more luxurious and can be refreshed, but it reacts to changes in humidity. Moisture-resistant MDF with a good surface layer is stable and very practical in modern kitchens.
What is the difference between melamine and HPL?
Both are surface layers, but HPL is pressed under much higher pressure, making it harder and more resistant to scratches and heat, which suits fronts that see heavy use.
Is MDF affected by water?
Standard MDF is affected if water reaches its edges, so moisture-resistant MDF is preferred for sink units, with every edge sealed.
What do E1 and E0 mean on boards?
They are ratings for how much the adhesive in the board emits. The lower the emissions, the better for the air quality in your home.
Can I see the materials before ordering?
Yes, at the ZBOM showroom in Khobar, where the designer walks you through the materials during the free design session.
Updated November 16, 2026
Back to the journal