When choosing a kitchen or a wardrobe, most of us focus on colours and finishes, and that's natural. But the part that moves most in a kitchen every day is the hinge. A door opened ten times a day is opened more than three thousand times a year, and tens of thousands of times over the life of the kitchen. A good hinge is the difference between a door that still closes straight and quietly years later, and one that sags and slams within months.
What is a concealed hinge, and why is it the standard?
A concealed hinge, sometimes called a European hinge, sits in a round recess drilled into the door and mounts on the inside of the cabinet, so it can't be seen when the door is closed. It looks clean and lets you adjust the door after installation without taking it off, which is why it has become the basis of modern kitchens and wardrobes.
How do hinges differ by door overlay?
Full overlay: the door covers the whole side of the cabinet, so the kitchen reads as one continuous front. This is the most common choice in modern designs.
Half overlay: two doors share one side panel, each covering half of it. It's used where two doors meet on a shared divider.
Inset: the door sits inside the cabinet frame, flush with it. It has a refined, classic look but needs very precise manufacturing and fitting.
Do you need soft close?
Soft close is a small damper that slows the door at the end of its swing so it closes without noise or impact. Over the years it protects the door and the cabinet from vibration, and it protects children's fingers. The damper can be built into the hinge, which is better and longer-lasting, or added as a separate piece.
Handleless kitchens usually use push to open instead: press the door and it opens by itself.
Which opening angle do you need?
About 110 degrees is common and suits most doors. Corner units, cabinets with inner drawers, or cabinets you need to open fully to take out large items need a wider angle, up to 165 or 170 degrees, so the door doesn't block the drawer.
Hinges for special cases
- Glass or aluminium-frame doors: hinges designed for them without a deep recess.
- Thick doors: hinges with a base suited to the thickness.
- Corner cabinets: special-angle hinges that let both doors open without clashing.
- Upward-opening wall units: these don't rely on ordinary hinges but on lift mechanisms that hold the door open at any height.
How do you judge a hinge's durability?
Test cycles: good hinges are machine-tested by opening and closing them tens of thousands of times. Ask for the number, and ask whether they are tested to a recognised standard such as the European EN 15570 for furniture hinge durability.
Rust resistance: in the Eastern Province, with high humidity and the sea close by, this matters more than almost anywhere, especially for the sink cabinet. Ask about the anti-corrosion coating and how it was tested.
Three-way adjustment: a good hinge lets you adjust the door up and down, in and out, and left and right, so doors stay straight and gaps stay even for years.
Clip-on mounting: lets you remove and refit a door without tools, which makes maintenance easier.
The right number per door: as a general rule, doors up to 90 cm tall need two hinges, 90 to 160 cm three, 160 to 200 cm four, and 200 to 240 cm five. Wide or heavy doors need more.
When does a hinge need adjusting or replacing?
- The door is crooked or the gap to the next door is uneven: a quick turn of a screwdriver usually fixes it.
- The door slams or no longer closes softly: the damper may have weakened.
- Grinding noise or visible rust: replace the hinge.
- The door pulls away where it's fixed: the problem may be the cabinet material, not the hinge.
What should you ask before signing for a kitchen or wardrobe?
- Which hinges are used, and is soft close built in?
- How many open-and-close cycles were they tested for?
- How do they cope with humidity, especially under the sink?
- How many hinges will each door get for its height?
- Does the warranty cover hardware and hinges, and for how many years?
- Who adjusts the doors after installation if they need it?
With ZBOM: try it with your own hands first
At the ZBOM showroom in Khobar you can open and close the doors yourself and ask the designer about every part before you choose. Every kitchen or wardrobe order comes with free interior design, free measuring, free delivery and installation in the Eastern Province, and a warranty of up to 15 years on kitchens and wardrobes. See the Lolita II kitchen, winner of a MUSE Design Awards gold in 2023, and the Auraro wardrobe.
Frequently asked questions
What's the difference between a "hydraulic" hinge and a standard one?
What the market calls a hydraulic hinge is a soft-close hinge with a damper that slows the door before it shuts. A standard hinge closes the door on spring force alone, so it hits the cabinet.
How many hinges does a wardrobe door need?
It depends on height and weight. A door 200 to 240 cm tall usually needs five hinges; one between 160 and 200 cm needs four.
Can soft close be added to an old kitchen?
In most cases, yes: either fit a separate damper next to the hinge or swap the hinge for the same type with a built-in damper.
Why do kitchen doors sag over time?
Usually loose screws, a door carrying more than it should, too few hinges, or cabinet material affected by humidity. Adjusting early stops it getting worse.
Updated November 16, 2026
Back to the journal